C5200 Powerful Bass Amplifier DIY Homemade

In this video C5200 Powerful Bass Amplifier, i’m showing, a way to make an extremely powerful ultra bass class-AB effective amplifier and an output capacitor 4700uf providing output to speaker. I have also used BD139 NPN and BD140 PNP transistors in audio section for better and clear sound.

I proven the circuit with 28 volts dc power supply. However you may use 12 volts to 35 volts dc. I used four ohms 35 watts audio speakers which furnished more sound.

Circuit Diagram

Following is the Circuit Diagram of C5200 Powerful Bass Amplifier with volume controller.The circuit gives nice sound quality with heavy bass. It uses minimum components and its ideal for beginners and learners. Click on the image to open it in a light box then click the “Download” button to download the circuit diagram into your computer for future use.

More Circuit Layouts

Development images

of C5200 Powerful Bass Amplifier

Step-1
Take four pieces of c5200 transistors and fix them on a solid large heat sink with mica (rubber insulation). Divide them into two sets of two pieces and join all three pins of one set like base to base, collector to collector and emitter to emitter with pieces of wire. And repeat the same connections with the other set, as shown in the following video.

Step-2

Step-3

Step-4

Step-5

Step-6

Step-7

Step-8

Step-9

Step-10

Step-11

Step-12

Step-13

Step-14

Step-15

Step-16

Step-17

Step-18

Step-19

List of Components

used in C5200 Powerful Bass Amplifier

• 2SC5200 Transistor x 4
• BD139 Transistor x 2
• BD140 Transistor x 1
• 3.3uf / 16v Capacitor x 1
• 4700uf / 50v Capacitor x 1
• 1N4007 Diode x 2
• 1k Ohms Resistor x 1
• 120k Ohms Resistor x 1
• 50k Potentiometer Single Pole x 1
• Heat Sink x 1
• Power Supply 12v to 35v
• Speakers 4 Ohms

Thanks for watching & visiting the site. Please share it with your friends. Thank you.