Simple Bass Amplifier Circuit using 2SC5200, 2SA1943 & JRC4558

Introduction

A bass amplifier is an essential component for any musician looking to enhance their low-frequency tones. In this article, we will explore a simple bass amplifier circuit diagram that utilizes the 2SC5200 and 2SA1943 transistors in the output section, along with the JRC4558 operational amplifier in the preamplifier section. By understanding the specifications and capabilities of these components, we can build an efficient and powerful bass amplifier.

Specification List:

Below is a vertical order list of the specifications for the 2SC5200, 2SA1943, and JRC4558:

1. 2SC5200:

• Type: NPN transistor
• Maximum Collector Power Dissipation: 150W
• Maximum Collector-Base Voltage: 230V
• Maximum Collector-Emitter Voltage: 230V
• Maximum Emitter-Base Voltage: 5V
• Maximum Collector Current: 15A
• Transition Frequency (ft): 30MHz
• DC Current Gain (hFE): 55 to 320

2. 2SA1943:

• Type: PNP transistor
• Maximum Collector Power Dissipation: 150W
• Maximum Collector-Base Voltage: -230V
• Maximum Collector-Emitter Voltage: -230V
• Maximum Emitter-Base Voltage: -5V
• Maximum Collector Current: -15A
• Transition Frequency (ft): 30MHz
• DC Current Gain (hFE): 55 to 320

3. JRC4558:

• Type: Dual JFET-Input Operational Amplifier
• Maximum Supply Voltage: ±22V
• Input Voltage: ±15V
• Output Voltage: ±13V
• Slew Rate: 3V/µs
• Gain Bandwidth Product: 3MHz
• Total Harmonic Distortion: 0.03%

Simple Bass Amplifier Circuit Diagram using 2SC5200 & JRC4558

This project can be built using a few basic components. The circuit diagram of this project is shown below.

Power Supply Circuit Diagram

More Circuit Layouts

JRC4558 IC Pinout

Components List of Simple Bass Amplifier Circuit using 2SC5200 & JRC4558

Following is the list of all components used in this project:

• 2SC5200 Transistor x 1
• 2SA1943 Transistor x 1
• JRC4558 Operational Amplifier IC x 1
• 1k Resister x 1
• 100k Resister x 1
• 10k Resister x 2
• 47k Resister x 1
• 100Ω/2W Resister x 1
• 0.47Ω/5W Resister x 2
• 50k Potentiometer x 1
• 10µF Capacitor x 1
• 47µF Capacitor x 1
• 4700µF Capacitor x 1
• 12-30V Single Power Supply
• 4Ω Speaker

Explanation of Simple Bass Amplifier Circuit using 2SC5200 & JRC4558

A simple bass amplifier circuit using 2SC5200 and 2SA1943 transistors in the output section and JRC4558 in the preamplifier section is a basic design that can enhance the bass response of an audio signal. This circuit can be used in audio systems, musical instruments, or as a standalone bass amplifier.

The preamplifier section of the circuit consists of a JRC4558 operational amplifier (op-amp). The op-amp amplifies the weak audio signal from a source such as a microphone or music player. It provides gain, allowing the signal to reach a suitable level for further processing. The op-amp also helps in equalizing the signal, boosting the bass frequencies and improving the overall sound quality.

The output section of the circuit includes two power transistors, 2SC5200 (NPN) and 2SA1943 (PNP). These transistors work in a complementary push-pull configuration, allowing the amplified signal from the preamplifier to drive the connected speaker or audio system. The push-pull configuration ensures that the bass frequencies are reproduced accurately, improving the low-end response of the audio signal.

The 2SC5200 and 2SA1943 transistors are chosen for their high power handling capabilities, which are essential for driving larger speakers or audio systems. They can handle high voltages and currents without distortion or overheating, providing a clean and powerful bass output.

Overall, this circuit combines the amplification and equalization capabilities of the JRC4558 op-amp with the power handling capabilities of the 2SC5200 and 2SA1943 transistors to create a simple yet effective bass amplifier circuit.

Conclusion

The 2SC5200 and 2SA1943 transistors, along with the JRC4558 operational amplifier, are key components in building a simple yet efficient bass amplifier circuit. The transistors provide high power handling capability, ensuring a clean and powerful output for bass frequencies. The JRC4558 op-amp, known for its low distortion and high gain, enhances the signal through the preamplifier section, resulting in a rich and well-defined bass tone. By understanding their specifications, we can design a bass amplifier with optimal performance and superior sound quality.

More projects, You may like:

• Video Transmitter DIY Homemade FM Radio Transmitter
• Adjustable Power Supply DIY Battery Charger
• 12V-220V 500 Watt inverter DIY Homemade
• MPPT Solar Charge Controller DIY Homemade
• DIY LA4440 bass amplifier homemade

For more project and circuit diagrams, you can go through the Schematics in the main menu where you can find many interesting projects and circuit diagrams like audio amplifier circuits, voltage booster circuit, battery charger circuit and timer circuits etc., which are all beginner circuit projects. Feel free to check them out!

Thank you for visiting the article.