Remote Relay Switch DIY Circuit Diagram

Introduction

In today’s modern era, technology has changed the way we live and work. Smart homes and automation systems have become increasingly popular. A remote relay switch is one such device that can make everyday life easier and more convenient. A remote relay switch DIY circuit using CD4017 IC and IR receiver is an excellent example of advanced technology that anyone can build and use in their home.

Circuit Diagram of Remote Relay Switch DIY

This circuit can be built using a few basic components. The circuit diagram of this project is shown below.

**Remote Relay Switch DIY Circuit Diagram**

More Circuit Layouts

**120W Power Amplifier TDA7294 Circuit Diagram**

13003 Stereo Amplifier Circuit Diagram — **120W Power Amplifier TDA7294 Circuit Diagram**

**Variable Power Supply 0-30V_10A Circuit Diagram**

Stereo Amplifier TDA7297 Dual-Bridge Circuit Diagram — **Variable Power Supply 0-30V_10A Circuit Diagram**

Components List of Remote Relay Switch DIY Circuit

Following is the list of components used in the project:

1X CD4017 IC
1X IR RECEIVER
1X A1015 TRANSISTOR
1X C945 TRANSISTOR
1X 1N4007 DIODE
1X 100 UF CAPACITOR
1X 47 UF CAPACITOR
1X GREEN LED
1X RED LED
1X 6V RELAY
1X 1K OHM RESISTOR
1X 100 OHM RESISTORS
3X 10K OHM TRANSISTORS
2X 470 OHM RESISTORS
1X 2.2 K OHM RESISTORS
1X 3 PIN TERMINAL BLOCK
1X 2 PIN TERMINAL BLOCK
1X PIECE OF VERO BOARD
JUMPER WIRES

Working Explanation of Remote Relay Switch DIY

The CD4017 IC is a decade counter that has ten output pins to drive LED’s or other devices. The IR receiver, on the other hand, detects infrared light signals and converts them into electrical signals. Putting both of these components together forms a remote relay switch circuit that can be operated using a remote control.

Body:

The remote relay switch DIY circuit using CD4017 IC and IR receiver is easy to build and requires only a few basic components such as resistors, capacitors, and transistors etc. Once assembled, the circuit can switch on or off any electrical device in the home from a distance. Here is a step-by-step guide on building the circuit:

Gather all the components needed to build the circuit.
Connect the IR receiver to the CD4017 IC.
Add a transistor and resistor to switch on or off the electrical device.
Connect a power supply to the circuit.
Test the circuit using a remote control. The electrical device should switch on or off when the remote control button is pressed.

Using a remote relay switch DIY circuit has many advantages, including convenience, energy-saving, and safety. For example, it can be used to control lights, fans, and other devices in a home from a distance, thus saving time and effort. Additionally, it can help save energy by automatically switching off devices when they are not in use. Lastly, using a remote relay switch can significantly improve safety by preventing accidents caused by electrical shocks while operating switches.

Conclusion of Remote Relay Switch DIY Circuit

Building a relay switch DIY circuit using CD4017 IC and IR receiver is an excellent way to make your home smarter and more convenient. With this circuit, you can control electrical devices from a distance, save energy, and improve safety in your home. The process of building this circuit is easy and requires only a few basic components. So why wait? Start building your own remote relay switch and take a step towards making your home a smarter and safer place to live.