Introduction
In this video I am going to make a DC Motor Speed Controller 150W DIY using 555 timer IC and a few common components. A DC motor controller manipulates the position, speed, or torque of a DC-powered motor and without problems reverses, so the DC motor power contemporary runs with inside the contrary direction. Enjoy better beginning torque, brief beginning and stopping, reversing, variable speeds with voltage enter and more. I hope you will like the project. Please share this project among your friends circle.
DC Motors performs a crucial position in electricity conversion process. It is a gadget which converts electrical power into mechanical power. In mechanical system, pace varies with variety of venture so pace manipulate is vital to do mechanical paintings in a right way. It makes motor to function easily.
DC Motors plays an important role in energy conversion process. It is a machine which converts electrical energy into mechanical energy. In mechanical system, speed varies with number of task so speed control is necessary to do mechanical work in a proper way. It makes motor to operate easily. Without control of the DC motor torque/current, the motor is allowed to pull large currents that can often result in torques delivered in excess of what is mechanically viable for the system, leading to imminent failure (especially when gear with a large reduction ratio is used).
Circuit diagram
of DC Motor Speed Controller
Following are the Circuit Diagram and Schematic of the project DC Motor Speed Controller.
More Circuit Layouts
Project Images
Image-1
Image-2
Image-3
Image-4
Components List
- 1X 555 Timer IC
- 1 x IRFZ44 MOSFET
- 1X 6A10 DIODE
- 3X 1N4148 DIODES
- 1 x LEDs
- 1 x 0.1uF(100n) CAPACITOR
- 1 x 100uF CAPACITOR
- 1X 10K Potentiometer
- 3X 1K RESISTORS
- 1X 10K RESISTORS
- 2 x 2 PIN TERMINAL BLOCKS
- 1X PERF BOARD
- JUMPER WIRES