2N6098 Pinout, Equivalent, Application, Datasheet

The 2N6098 NPN transistor is a high-power switching and amplification transistor designed for rugged industrial and audio applications. If you’re searching for the 2N6098 pinout, specifications, features, and equivalents, this fully detailed guide covers everything you need to integrate this device correctly into your circuit designs.

Introduction to 2N6098 NPN Transistor

The 2N6098 is a high-current NPN power transistor built in the TO-220 package, ideal for demanding power switching, motor control, and audio output stages. With a collector-emitter voltage (Vce) of 70 V, collector-base voltage (Vcb) of 70 V, and a strong 10 A collector current, this transistor is built for heavy-duty performance.

Its 75 W power dissipation capability makes it suitable for use in high-temperature and high-load environments, including regulated power supplies, industrial drivers, and output amplifier circuits. Thanks to its robust structure and stable gain characteristics, the 2N6098 NPN transistor is one of the most reliable medium-high power devices for modern electronics.

2N6098 NPN Transistor

Pinout of 2N6098

Pin Configuration of 2N6098 Pinout

Understanding the 2N6098 Pinout Configuration

The 2N6098 pinout follows the standard B-C-E (Base-Collector-Emitter) order when viewing the TO-220 package from the front with leads downward. Understanding this arrangement is essential to avoid wiring errors and to ensure correct current flow in switching or amplification circuits.

Key Features of 2N6098 Transistor

• High-current handling for demanding loads
• Strong power dissipation capacity
• Suitable for linear and switching designs
• Fast switching response with stable gain
• Rugged TO-220 package for industrial reliability
• Versatile use in audio, power, and motor circuits

2N6098 Transistor Datasheet and Specifications

• Collector-Emitter Voltage (Vce): 70 V
• Collector-Base Voltage (Vcb): 70 V
• Emitter-Base Voltage (Veb): 5 V
• Collector Current (Ic): 10 A
• Power Dissipation (Ptot): 75 W
• DC Current Gain (hFE): 15–100 (typical range depending on Ic)
• Collector-Emitter Saturation Voltage: Low (improves switching efficiency)
• Transition Frequency (fT): ~3 MHz
• Package Type: TO-220
• Transistor Polarity: NPN

Working Principle of 2N6098 Transistor

The 2N6098 operates by allowing current to flow from the collector to the emitter when a small bias current is applied at the base. Because it is an NPN BJT, the device turns ON when the base receives a positive voltage relative to the emitter.

In switching circuits, it works efficiently in saturation and cutoff modes, providing fast transitions and stable performance. In linear circuits like audio amplifiers, it offers controlled and smooth current gain, making it ideal for driving medium-power loads. Its heavy-duty construction allows the transistor to handle 10 A with proper heat-sinking, ensuring long-term reliability.

More Circuit Layouts

Applications of 2N6098 Transistor

• Power amplifiers
• Audio output stages
• SMPS and regulated power supplies
• Relay and solenoid drivers
• DC motor control systems
• Industrial automation circuits
• Medium-power switching modules

Equivalent and Alternative Transistors

These transistors share similar voltage, current, and power ratings:

• 2N6099
• TIP3055
• BD249C
• MJE15030
• BD911
• 2N6284 (higher rating alternative)

Always verify pin configuration and thermal ratings before substitution.

Frequently Asked Questions (FAQ)

What is the 2N6098 transistor used for?

It is used for high-power switching, audio amplification, motor driving, and power regulation.

What is the pin configuration of 2N6098?

The 2N6098 pinout is Base-Collector-Emitter (B-C-E) in the TO-220 package.

Is 2N6098 NPN or PNP?

The 2N6098 is an NPN transistor.

What is the maximum current rating of 2N6098?

It can handle up to 10 A of collector current.

What is the complementary transistor for 2N6098?

The complementary device is the 2N6103 PNP transistor.

Conclusion

The 2N6098 NPN transistor is a robust and reliable high-power device designed for demanding switching and amplification roles. With its 70 V voltage rating, 10 A current handling, and 75 W power dissipation, it is suitable for a wide range of industrial and consumer applications.

Understanding the 2N6098 pinout, datasheet parameters, and equivalent options ensures proper integration into circuits such as power supplies, audio stages, motor drivers, and automation equipment. Its complementary pairing with 2N6103 further expands its usefulness in symmetrical and push-pull designs.

Datasheet & Pinout of 2N6098 NPN Transistor

Click the following Button to download the datasheet of 2N6098 Transistor :

More projects, You may like:

• Video Transmitter DIY Homemade FM Radio Transmitter
• Adjustable Power Supply DIY Battery Charger
• 12V-220V 500 Watt inverter DIY Homemade
• MPPT Solar Charge Controller DIY Homemade
• DIY LA4440 bass amplifier homemade

For more project and circuit diagrams, you can go through the Schematics in the main menu where you can find many interesting projects and circuit diagrams like audio amplifier circuits, voltage booster circuit, battery charger circuit and timer circuits etc., which are all beginner circuit projects. Feel free to check them out!

Thank you for visiting the article.