This machine is called a Perpetual Motion Machine. The machine is not yet constructed physically. Any one who try to construct it, please do some basic experiments according to physics laws and then try at your own risk. This machine was designed/invented by me several years ago and was not constructed due to lake of funds. My name is Abdul Malik and I am from Karachi, Pakistan.
All the cubes must have the same weight and size which should be according to the size and strength of the machine. 10 kgs is an imaginery figure for demonstration purpose but this size of machine may accept upto 50 kgs of each cube easily.
The distance of the moving cubes is assumed as 8 feets. Reloadingor lifting of 8 feets distance by 4 cubes of each group, is completing its process one by one 8 times faster than the falling cubes within 4 feets of distance. 80 kgs power of torque within 4 feets distance is loading 10 kgs cube at a time within 8 feets of distance.
Automatic Lifting, Locking, Unlocking functions are not shown in this video and may be added in the next extended version depends upon the popularity or demand.
used in perpetual motion machine
This is a front view of the machine. The machine consist of 3 groups. Each group contains 4 wheels. Each wheel is connected with a single weight of 10 kgs and tightened with rope. When the weight release from top, it pulls the wheel. In response the wheel turns clockwise and rotate its shaft.
Likewise all shafts of all wheels are connected with the main propeller shaft with bicycle’s rear gear sprocket.
The main propeller shaft is shown in the following image where a large RED wheel is is connected with. This is a heavy wheel which creates momentum of the machine and keep smooth running.
A generator is attached with the main propeller shaft which will generate electricity.
Weight and platform is shown in the following image. All weights are hanged with ropes. Also they are stuck with two vertical shafts where they slides and prevents moving elsewhere.
Following images shows the top view of the machine where a main pulley is fixed for each wheel. It helps rope to slide smoothly.
Following image shows right view.
This is a rear view where all pulleys and gears are shown.
Below image shows, how the a group engage and disengage with the function. When they engage, they rotate clockwise and likewise when they disengage, they reload 4 weights one by one with 8 times faster.
This is a top view in the following image where all 3 groups arrangement can be seen.
Here is a front view but the shot is taken from bottom.
This is a left view where a load wheel can be seen.
Inner view is here where are chains are attached with related gears and sprockets.
This is also an inner view from the middle.
And a final shot is taken at the end.
I hope you enjoyed the project. Thank you so much for visiting the site. Please share this post among your friends. Thanks.