500W Amplifier Circuit Diagram using MJ15003 & TL071

Introduction

In this article, we will explore a 500W amplifier circuit diagram that utilizes the MJ15003 transistor and TL071 IC. Amplifiers are essential components in any audio system, magnifying weak audio signals to produce high-quality, louder sound output. This circuit diagram presents a powerful, high-performance amplifier design suitable for various applications. We will discuss the specifications of the MJ15003 transistor and TL071 IC, dive into the circuit diagram, and highlight the key features and benefits of this amplifier.

Specifications of MJ15003 Transistor:

The MJ15003 is a widely used power transistor known for its exceptional performance in high-power audio amplifier designs. Here are the specifications of the MJ15003 transistor:

1. Maximum Collector-Emitter Voltage (VCEO): 140V
2. Maximum Collector-Base Voltage (VCBO): 140V
3. Maximum Emitter-Base Voltage (VEBO): 7V
4. Continuous Collector Current (IC): 15A
5. Base Current (IB): 0.5A
6. Power Dissipation (PD): 200W
7. Transition Frequency (fT): 4MHz
8. Gain (hFE): 20-70

Specifications of TL071 IC:

The TL071 is a low-noise JFET-input operational amplifier, suitable for a wide range of audio and signal processing applications. Below are the specifications of the TL071 IC:

1. Single-Supply Voltage Range: 6V to 36V
2. Dual-Supply Voltage Range: ±3V to ±18V
3. Input Offset Voltage (VIO): 3mV (max)
4. Input Bias Current (IB): 30pA (typ)
5. Input Offset Current (IOS): 5pA (typ)
6. Input Voltage Noise (eN): 18nV/√Hz (typ)
7. Gain Bandwidth Product (GBW): 3MHz
8. Slew Rate: 13V/μs

500W Amplifier Circuit Diagram using MJ15003 & TL071

This project can be built using a few basic components. The circuit diagram of this project is shown below.

Caution: Website contains information on high voltage circuits. Proceed at your own risk, ensuring proper knowledge and precautionary measures to prevent electric shock or injury.

More Circuit Layouts

Components List of 500W Amplifier Circuit using MJ15003 & TL071

Following is the list of all components used in this project:

Amplifier Parts List:

• Transistors
• MJ15003 Transistor x 8
• MJE15030 Transistor x 2
• MJE15031 Transistor x 2
• BD139 Transistor x 1
• BD140 Transistor x 1
• TL071 IC x 1
  Diodes
• 15V Zener Diode x 2
• 1N4048 Diode x 2
  Resisters
• 0.22Ω Resister x 8
• 68Ω Resister x 4
• 470Ω Resister x 4
• 1k Resister x 1
• 27k Resister x 1
• 1.5k Resister x 1
• 150Ω Resister x 1
• 2.7k Resister x 1
• 33k Resister x 2
• 5.6k Resister x 5
• 100Ω Resister x 2
  Capacitors
• 470nF Capacitor x 1
• 470pF Capacitor x 1
• 100µF Capacitor x 5
• 22µF Capacitor x 2
• 100nF Capacitor x 3
• 10µF Capacitor x 1
• 15nF Capacitor x 1
• 33pF Capacitor x 1
• Capacitor x
• Capacitor x

±63V Power Supply Parts List:

• 54V-0V-54V AC 850W Transformer x 1
• Bridge Rectifier 10A x 1 (or 4 Diodes)
• 20,000µF / 100V Capacitor x 2
• 10A Fuse x 2 (for ±63V DC)
• 3.15A Fuse x 1 (220V AC)
• 220V On/Off Switch x 1

Explanation of 500W Amplifier Circuit using MJ15003 & TL071

The 500W amplifier circuit diagram utilizes multiple MJ15003 transistors and a TL071 IC chip to deliver high power and excellent sound quality. It consists of several stages, including the input stage, voltage amplifier stage, driver stage, and output stage.

The input stage begins with an TL071 IC acting as a buffer for the audio input signal. This helps to eliminate distortion and impedance mismatch between the signal source and the amplifier circuit. The buffered signal then progresses to the voltage amplifier stage, where it is amplified to a higher voltage level.

In the driver stage, multiple MJE15030 & MJE15031 transistors are employed to amplify the voltage of the audio signal further. These transistors provide the necessary current gain required to drive the final output stage effectively. Finally, the output stage harnesses the power of the amplified signal, making it suitable for driving speakers or other audio devices.

Conclusion

The 500W amplifier circuit diagram utilizing the MJ15003 transistor and TL071 IC provides a powerful and efficient solution for high-fidelity audio amplification. With the excellent specifications of the MJ15003 transistor regarding power handling and the low-noise characteristics of the TL071 IC, this circuit delivers outstanding sound quality and ample power for various audio applications. By employing this circuit design, audio enthusiasts and professionals can enjoy a remarkable audio experience with crystal-clear sound reproduction and high power output.

More projects, You may like:

• Video Transmitter DIY Homemade FM Radio Transmitter
• Adjustable Power Supply DIY Battery Charger
• 12V-220V 500 Watt inverter DIY Homemade
• MPPT Solar Charge Controller DIY Homemade

For more project and circuit diagrams, you can go through the Schematics in the main menu where you can find many interesting projects and circuit diagrams like audio amplifier circuits, voltage booster circuit, and timer circuits etc. Feel free to check them out!

Thank you for visiting the article.