TDA7240 Pinout, Equivalent, Application, Datasheet

High-Power Audio Designs Often Depend on Bridge Amplifier ICs Like the TDA7240, and this IC stands out for its stability and efficiency. With a compact structure, simple external components, and a highly reliable thermal design, the TDA7240 pinout makes it easy to integrate into car audio systems and portable speakers.

Introduction

The TDA7240 is a Bridge Audio Amplifier IC designed for medium-power audio applications where high output power is required without using bulky transformers or dual-supply rails. Operating from a single supply between 18V and 28V, this IC delivers strong output performance and maintains excellent audio clarity. It is widely used in car radios, portable audio amplifiers, multimedia speakers, and compact audio systems.

One of the main advantages of the TDA7240 is its bridge-tied load (BTL) configuration, which effectively doubles output power compared to a single-ended amplifier using the same supply voltage. The IC also includes built-in features such as thermal shutdown protection, output short-circuit protection, and safe operating area control, making it extremely robust for demanding audio environments.

Pin Configuration / Pinout of TDA7240 Power Amplifier IC

Understanding the TDA7240 Pinout Configuration

The TDA7240 pinout is designed for convenience and ease of implementation in amplifier circuits. Each pin manages essential functions such as input signal, output terminals, bootstrap connection, and power supply. The BTL configuration uses internal circuitry to drive the speaker without requiring an output coupling capacitor, ensuring higher efficiency and improved low-frequency response.

Note: DATASHEET DOWNLOAD button is provided end of this article.

TDA7240 Key Features

• Compact bridge amplifier design
• High audio output without output capacitor
• Built-in thermal protection
• Short-circuit and overload protection
• Low distortion and noise performance
• High stability and reliability
• Suitable for single-supply applications

TDA7240 Specifications/Characteristics

• Supply Voltage Range: 18V to 28V
• Total Power Dissipation (Ptot): 16W
• Storage Temperature (Tstg): -40°C to 150°C
• Package Type: Multi-lead audio IC package (SIP/ZIP depending on variant)
• Operating Mode: Bridge-Tied Load (BTL) Output
• Output Power Capability: High efficiency at medium power levels
• Internal Thermal Shutdown: Supported
• Internal Overload Protection: Supported

Key Applications of TDA7240 Power Amplifier IC

• Car audio amplifiers
• Portable multimedia speakers
• Boom box audio systems
• DIY audio amplifier projects
• Compact home audio units
• Battery-powered audio devices
• Consumer audio electronics

TDA7240 Equivalent ICs / Alternatives

(Verify pin compatibility before using substitutions)

• TDA2003 (lower power)
• TDA2004 (dual amplifier)
• TDA1552Q (BTL amplifier IC)
• TDA2050 (higher power class-AB)
• LM1875 (hi-fi audio IC)

More Circuit Layouts

Working Principle of TDA7240

The TDA7240 works on the Bridge-Tied Load amplifier principle, where two internal amplifier stages operate out of phase to drive both ends of the speaker. This results in double the voltage swing, significantly increasing output power. The IC requires only a few external components such as biasing resistors, input capacitors, and bootstrap capacitors.

The internal protection circuitry ensures the amplifier remains safe under overload, overtemperature, or abrupt output conditions. Its design helps maintain audio clarity while preventing thermal runaway and clipping distortion under high-power operation.

Frequently Asked Questions (FAQ)

Q1: Is TDA7240 suitable for car audio?
Yes, it is commonly used in car audio systems due to its single-supply operation and BTL configuration.

Q2: Does it require a heatsink?
Yes, for continuous high-power use, a heatsink is essential.

Q3: Can I run it below 18V?
No, proper performance requires at least 18V input power.

Q4: Is a coupling capacitor required for the speaker?
No, the BTL design eliminates the need for an output capacitor.

Q5: Can it drive a subwoofer?
It can drive small subwoofers, but not high-power units.

Conclusion

The TDA7240 Bridge Amplifier IC is an excellent choice for medium-power audio applications requiring high efficiency, good sound quality, and minimal external components. With its built-in protection, BTL configuration, and strong output performance, it remains a popular option for car audio, portable speakers, and DIY amplifier projects. Its robust design ensures reliable operation even under challenging conditions, making it a dependable solution for compact amplifier systems.

Datasheet of TDA7240 Power Amplifier IC

Click the following Button below to download the datasheet of TDA7240 :

More projects, You may like:

• Video Transmitter DIY Homemade FM Radio Transmitter
• Adjustable Power Supply DIY Battery Charger
• 12V-220V 500 Watt inverter DIY Homemade
• MPPT Solar Charge Controller DIY Homemade
• DIY LA4440 bass amplifier homemade

For more project and circuit diagrams, you can go through the Schematics in the main menu where you can find many interesting projects and circuit diagrams like audio amplifier circuits, voltage booster circuit, battery charger circuit and timer circuits etc., which are all beginner circuit projects. Feel free to check them out!

Thank you for visiting the article.